Horizontal Stripes (Side To Side Direction) - Lexmark T650 Service Manual

Step
7 Perform a print test.
Does the problem remain?

Horizontal stripes (side to side direction)

Leading edge
Trailing edge
Step
1 Check the media condition.
Load new, dry, recommended media.
Re-print the defective image.
Does the error continue?
2 Check the media transfer route.
Check the media route for contamination or obstacles.
3 Check the print cartridge for proper installation.
Is the above component properly installed?
4 Check the charge roll assembly for contamination and
wear.
Is the above component free of excess wear and
contamination?
5 Check the transfer roll assembly for contamination and
wear.
Is the above component free of excess wear and
contamination?
Check
Check
Yes No
Contact next Problem solved.
highest level of
tech support.
Yes
Go to step 2. Problem solved.
Go to step 3. Remove
obstacles or
contamination.
Go to step 4. Inspect, clean
and reinstall
replace the print
cartridge.
Go to step 5. Replace the
charge roll
assembly.
Go to "Access
door removal"
on page
Go to step 6. Replace the
transfer roll
assembly.
Go to "Transfer
roll assembly
removal" on
page 4-80.
Diagnostic information
4062
Previous
Next
Go Back
No
4-7.
2-159