Horizontal Light Bands Check - Lexmark B2650 Service Manual

Actions
Step 5
Remove the fuser, and check for damage or debris on the rollers
and belts.
Are the rollers and belts free of damage or debris?
Step 6
Replace the fuser.
Does the problem remain?

Horizontal light bands check

Note: Before performing this print quality check, go to the control panel home screen and navigate to
Settings > Troubleshooting > Print Quality Test Pages, and then perform the Initial print quality check.
See "Initial print quality check" on page
Actions
Step 1
Check if the printer is using a genuine and supported Lexmark
toner cartridge.
Note: If the printer is using a third‑party cartridge, then refer the
users to their cartridge supplier.
Is the printer using a genuine and supported toner cartridge?
Step 2
Install a genuine and supported toner cartridge.
Does the problem remain?
Step 3
Turn off the printer, wait for 10 seconds, and then turn on the printer.
Does the problem remain?
26.
Diagnostics and troubleshooting
49
4600-830, -835, -895
Yes No
Contact the next Go to step 6.
level of support.
Contact the next The problem is
level of support. solved.
Yes No
Go to step 3. Go to step 2.
Go to step 3. The problem is
solved.
Go to step 4. The problem is
solved.