Chapter 54: Disabling Size Sensing; Enabling Auto Size Sensing - Lexmark W820 User Manual

54
An administrator may choose to disable auto size sensing on trays. Auto size sensing allows for the
linking of trays. (For more information, see
are: Tray x size (where x represents trays 1 through 5), Auto, and Off. Two other menu items,
Executive/B5 and Legal/B4, are for special media sizes. See
more information.
To disable auto size sensing:
1
2
3
4
5
6
7
8

Enabling auto size sensing

To enable auto size sensing, repeat the steps in
page 180, select Auto instead of Off.
Downloaded From ManualsPrinter.com Manuals
Disabling Size Sensing
Turn the printer off.
Press and hold the
Select
Release the buttons when Performing Self Test appears on the display.
When the printer self test completes, Config Menu appears.
Press until you see Size Sensing, and then press
Menu
Note: Only paper trays that support auto size sensing are displayed on the operator
panel.
Press until you see Tray x Sensing, where x represents the tray number of the tray you
Menu
select to disable size sensing on, and then press
Repeat this for the other trays you want to disable size sensing for, if necessary.
Press until you see Off, and then press
Menu
Saved briefly appears. Config Menu appears again with Size Sensing on the second line.
Press .
Return
Press until you see Exit Config Menu, and then press
Menu
Activating Menu Changes briefly appears, followed by Performing Self Test. The
printer returns to the Ready message.
Linking trays.) The values for the Size Sensing menu item
and buttons, and then turn the printer on.
Return
Select
.
Select
Disabling Size
180
Sensing special print media sizes
.
Select
.
.
Select
Sensing. However, in
for
step 6 on