Diagnostic Aids; Diagnostics Mode; Diagnostics Mode Menu Structure - Lexmark Optra E 4026-0 Series Reference Handbook

Diagnostic Aids

Diagnostics Mode

To run the printer diagnostic tests described in this section, you must
put the printer in Diagnostics mode.
To enter Diagnostics mode:
1. Turn the printer off.
2. Press and hold the Ready and Return buttons. Then turn the
printer on. The printer performs the Power-On Self Test.
3. Release the buttons when [Performing Self Test] is displayed.
4. You can exit Diagnostics mode without a POR by selecting [Reset
Printer].

Diagnostics Mode Menu Structure

The following is the Diagnostics mode menu structure, The indented
items are submenus available under the main menu items, which are in
capital letters on the operator panel. Menu items referring to options will
only be present if those options are installed. Menus with more than
four items will use [MORE] on the fourth operator panel button to
access the next screen of selections.
PRINT TESTS
Print Test 1
Print Test 2
Print Test 3
Envelope Print Test
PRINT REGISTRATION
Left Margin
Top Margin
Bottom Margin
Quick Test
8-13
4049-XXX