Quantum Data 881 User Manual page 1021

4005
4006
4007
4008
4010
4020
4030
4040
4045
4100
4576
882 Video Test Instrument User Guide (Rev A.35)
Sequence editor running
The current firmware does not allow a new test sequence editing session to be started
while the current test sequence editing session is still running.
No sequence to save
An attempt was made to save the contents of a test sequence editing buffer when there
was no open test sequence editing session to save.
Sequence buffer full
No more steps can be added to the current sequence being edited because no more edit
buffer space is available.
Invalid delay setting in sequence
The test sequence contains one or more steps that have a negative number for the step
delay time.
Font index out of range
An attempt was made to use a font at an index location that is less than zero (0) or greater
than the highest index number in use.
No font present at given index
Attempt to access a font at a valid index but the specified index is empty because of a
previous delete.
Invalid font location
Can not install a font that has not first been transferred to memory.
Sequence is running
A sequence editing session can not be started while a sequence is running.
No sequence buffer
An attempt was made to change a parameter in a sequence step when there were no
sequence steps in the current sequence being edited.
Pattern index out of range
The selected index number for a drawing primitive's fill pattern is less than zero or greater
than the highest number used by the current firmware.
Can not convert to inches, not valid units
The format's current physical units of measure (inches or millimeters) is unknown and the
firmware is unable to convert a dimension to inches.
993