Quantum Data 881 User Manual page 1025

9460
9467
9470
9471
9472
9475
9477
9480
9490
9491
9492
882 Video Test Instrument User Guide (Rev A.35)
Bad location for format duplicate
This occurs during FMTD and FMTI commands when you try to use one or more invalid
format memory locations as the command arguments.
Bad location for format erase
This occurs during FMTZ command when you try to make one or more invalid format
memory locations as the command arguments.
Can not change EPROM contents
An attempt was made to insert a format using the FMTI command into an EPROM format
memory location.
Bad location for format yank
This occurs when you try to remove (yank) one or more formats from invalid format
memory locations using the FMTY command.
Can not change EPROM contents
This occurs when you try to remove (yank) one or more formats from EPROM format
memory locations using the FMTY command.
Can not change EPROM contents
One or more EPROM format locations was given as the destination location for the FMTD
command.
Error duplicating formats
The <first> memory location parameter used with the FMTD command is greater than the
<last> memory location parameter.
Format not found / Format data missing
The FMTR command tried to read a format from an empty format storage location.
DDC mod not present
The generator hardware configuration does not support DDC communications.
DDC not available
The generator hardware configuration does not support DDC communications.
DDC2B no ACK from receiver
Low level DDC communications failed with Unit Under Test (UUT). No DDC
acknowledgment bit was received from the UUT.
997