Quantum Data 881 User Manual page 1009

2111
2112
2113
2114
2115
2117
2118
2119
2120
2121
2122
2123
882 Video Test Instrument User Guide (Rev A.35)
Invalid digital audio signal type
The value specified for digital audio signal type (DAST) is out of range.
Invalid audio digital signal interface
The value specified for digital audio signal interface (DASI) is out of range.
Invalid number of audio channels available
Invalid audio level shift value
The value specified for digital audio level shift (DALS) is out of range.
Invalid audio sine wave rate
The value specified for digital audio sine wave rate (SRAT) is out of range.
Fs measured is not equal to Fs assigned
The value detected for the sampling frequency is not equal to the value assigned for the
audio sampling rate (ARAT). This typically means there is a hardware problem in the
generator's digital audio generator.
Invalid audio signal amplitude
The value specified by digital audio sine wave amplitude (SAMP) is out of range.
Send CP info error is not zero
The CP infoframe register on the transmitter is not set to zero and the infoframe is not
transmitted. This typically means that there is a hardware problem in the HDMI board.
Send AVI info error is not zero
The AVI infoframe register on the transmitter is not set to zero and the infoframe is not
transmitted. This typically means that there is a hardware problem in the HDMI board.
Send SPD info error is not zero
The SPD infoframe register on the transmitter is not set to zero and the infoframe is not
transmitted. This typically means that there is a hardware problem in the HDMI board.
Send AUD info error is not zero
The AUD infoframe register on the transmitter is not set to zero and the infoframe is not
transmitted. This typically means that there is a hardware problem in the HDMI board.
Send MPEG info error is not zero
The MPEG infoframe register on the transmitter is not set to zero and the infoframe is not
transmitted. This typically means that there is a hardware problem in the HDMI board.
981