Table 3-15. Rom Speed Bit Encodings - Motorola MVME5100 Programmer's Reference Manual

rom_a/b_spd0,1
%00
%01
%10
%11
rom_b_spd0,1
http://www.motorola.com/computer/literature
Writes that change these bits must be enveloped by a
period of time in which no accesses to ROM/Flash Block
A, occur. A simple way to provide the envelope is to
perform at least two accesses to this or another of the
SMC's registers before and after the write.

Table 3-15. ROM Speed Bit Encodings

Approximate ROM Block A/B Device Access Time
12 Clock Periods (120ns @ 100 MHz, 180ns @ 66.67 MHz)
8 Clock Periods (80ns @ 100 MHz, 120ns @ 66.67 MHz)
5 Clock Periods (50ns @ 100 MHz, 75ns @ 66.67 MHz)
3 Clock Periods (30ns @100 MHz, 45ns @ 66.67 MHz)
rom_b_spd0,1 determine the access timing used for
ROM/Flash Block B. Refer to the table above.
Writes that change these bits must be enveloped by a
period of time in which no accesses to ROM/Flash, Bank
B, occur. A simple way to provide the envelope is to
perform at least two accesses to this or another of the
SMC's registers before and after the write.
Programming Model
3-59
3