Disassembling The Guards - Technogym RECLINE EXCITE Service Maintenance Manual

RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3

7.7. DISASSEMBLING THE GUARDS

Figure 7.7-1
Figure 7.7-2
Carry out the procedure described in paragraph
7.6. "Disassembling the pedals and the pedal
cranks".
1. Back off the 7 screws a on either side of the
machine using a 4-mm Allen wrench.
2. Remove the right guard first.
3. Remove the seven pins c from the left guard.
4. Remove the left guard.
To reassemble the guards, carry out the above
steps in reverse order.
During reassembly, lock down the
screws using a torque wrench set for 0.8
Nm.
Page 7.21