Disassembling The Sensors - Technogym RECLINE EXCITE Service Maintenance Manual

RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3

7.5. DISASSEMBLING THE SENSORS

Only for 700, 700E and700SP models.
Figure 7.5-1
Figure 7.5-2
1. Turn off the machine and unplug the mains
lead from the wall outlet (only for the 700
model).
For each sensor:
2. Back off the 2 screws a using a small Phillips
screwdriver.
3. Lift up the top sensor.
4. Remove the lower sensor.
5. To disconnect the sensors, back off the two
screws b using a small Phillips screwdriver.
To reassemble the sensors, carry out the above
steps in reverse order.
Page 7.19