Technogym RECLINE EXCITE Service Maintenance Manual page 65

RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
(3) Using a tester, check that all the output voltages on connector CN1 of the brake board are
correct, referring to paragraph 2.8. "Cables".
(4) As for step (3) but on connector CN16 on the connector board.
(5) As for step (3) but on connector CN5 on the CPU board.
(6) As for step (3) but on connector CN1 on the LCD inverter board.
(7) Place the tester probes across the 2 pins of the connector CN2 and CN3 of the LCD invrter
board. The measured voltage should be approximately 380 VAC.
Page 6.17