Distance; Maximum Excercise Time; Pause Time : Xxx - Technogym RECLINE EXCITE Service Maintenance Manual

RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
9.2.2. D
ISTANCE
It is possible to choose between EUROPEAN units (kg and km) or IMPERIAL units (pounds and
miles). To change the selection, when the LED matrix shows the current setting:
Press the +/- GOAL keys to select the desired unit of measurement from the options listed in the
table below:
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.2.3. M
AXIMUM EXCERCISE TIME
It is possible to set a maximum duration for the exercise in minutes, with a value ranging from 1 to
9999. To change the setting, when the LED matrix shows the current maximum exercise time:
Press the ENTER key to modify the value: when the current parameter value starts to blink, press
the CLEAR key to erase the current value and then enter one digit at a time using the ↑and ↓ keys
to change the value and the +/- GOAL keys to scroll to the next character.
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 9999.
9.2.4. P
AUSE TIME
It is possible to set a maximum pause time for each exercise in seconds, with values ranging from
10 to 999. To change the setting, when the LED matrix shows the current maximum time:
Press the ENTER key to modify the value: when the current parameter value starts to blink, press
the CLEAR key to erase the current value and then enter one digit at a time using the ↑and ↓ keys
to change the value and the +/- GOAL keys to scroll to the next character.
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 60.
DISTANCE : xxx
D
ISTANCE
KM <default>
MLS
MAX TIME: xxx

PAUSE TIME : xxx

Page 9.7