Table of Contents
Advertisement
9.1.8.
M
ODIFIABLE TARGET HEART RATE
It is possible to enable or disable modification of the target heart rate during a constant heart rate
exercise. To change the selection, when the LED matrix shows the current setting:
Press the +/- GOAL number keys to select the desired option out of those listed in the table below:
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.1.9.
E
NABLE CUSTOM MESSAGES
It is possible to configure whether a custom message is displayed when the machine is in the
standby state. To change the selection, when the LED matrix shows the current setting:
Press the +/- GOAL number keys to select the desired option out of those listed in the table below:
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.1.10. E
DIT CUSTOM MESSAGES
It is possible to modify the custom messages; press ENTER to invoke a submenu which displays
the first custom message, then use the +/- effort level keys to move to the other messages. Press the
ENTER key again to begin editing a message, or hold down the CLEAR key for a few seconds to
return to the upper menu level. While editing a message, move the cursor using +/- GOAL, select
the desired letter using the +/- effort level keys and use CLEAR to enter a blank space character.
Press ENTER to save the modified message, or hold down the CLEAR key to cancel and return to
the upper menu level.
9.1.11. E
NABLE MULTI
The machine can be configured to allow selection of the language at each session. To change the
selection, when the LED matrix shows the current setting:
Press the +/- GOAL number keys to select the desired option out of those listed in the table below:
Page 9.4
RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
HR : xxx
HR
MODIFIABLE <default>
NOT MODIFIABLE
CUSTOM MESS. : xxx
CUSTOM MESS.
YES
NO
-
LANGUAGE MODE
LANGUAGE : xxx
<default>
Advertisement
Table of Contents
Troubleshooting
