Disassembling The Electrical Box - Technogym RECLINE EXCITE Service Maintenance Manual

7.8. DISASSEMBLING THE ELECTRICAL BOX

Figure 7.8-1
Figure 7.8-2
Fiure 7.8-1
Page 7.22
RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
Carry out the procedure described in paragraph
7.7. "Disassembling the guards".
1. Back off the screws a using a medium
Phillips screwdriver.
2. Remove the cover from the box.
3. Unplug the connectors indicated in the
figure.
4. Back off the two screws b using a 3-mm
Allen wrench.
5. Remove the electrical box.
To reassemble the electrical box, carry out the
above steps in reverse order.
During reassembly, lock down the
screws b using a torque wrench set for 5
Nm.