Figure 7.2-14
Figure 7.2-15
Figure 7.2-16
Page 7.12
RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
4. Back off the 2 screws m that are fixing the
headphone jack, using a small Phillips
screwdriver.
5. Pull the connector out of its seat and unplug
the connector indicated in the figure
6. Remove the display plate from the front
covering.
7. Back off the 2 screws n using a small
Phillips screwdriver.
8. Back off the 2 screws o using a small Phillips
screwdriver.
To reassemble the circuit boards and the LCD,
carry out the above steps in reverse order.