Table of Contents
Advertisement
RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
• COM3;
• KEYBOARD.
Pressing ENTER displays a message with either OK or KO alongside each of the above items,
depending on whether the outcome of the corresponding test was positive or negative.
Note that if this function is invoked without having previously performed any tests, it will show a
negative outcome for all the items. This is because it merely displays the results, but does not
actually carry out the tests.
6.2.1.5.
Reset Result
This function clears the output of the Test Results viewing function, resetting the outcomes of all
the tests to KO.
6.2.2.
M
ANUAL
This section groups together tests for manually checking the operation of certain peripheral devices.
After selecting the desired test using the + and – effort level keys, press ENTER to initiate the test
and then await the result. To exit test mode, hold down the CLEAR key for a few seconds.
6.2.2.1.
Man. Keyboard Test
The manual keyboard test checks the functioning of all the keys on the keyboard. After accessing
the test by pressing ENTER, the message "Press all buttons (beep=OK)" appears on the display.
Pressing each key will produce an audible signal, if a key does not produce the "beep" it means it is
not working properly.
T
EST
Page 6.7
Advertisement
Table of Contents
Troubleshooting
