Default Calories; Default Distance; Enable Tgs - Technogym RECLINE EXCITE Service Maintenance Manual

RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
9.2.8. D
EFAULT CALORIES
It is possible to set the calories for every exercise, with values ranging from 10 to 999. To change
the setting, when the LED matrix shows the current setting:
Press the ENTER key to change the parameter: the current value of the parameter will start to
blink, press the CLEAR key to erase the current value and then enter one digit at a time using the
↑and ↓ keys to change the value and the +/- GOAL keys to scroll to the next character.
Press ENTER to confirm the changes made, and use the + or – effort level keys to move to the next
or preceding parameter.
The default value of this parameter is 300.
9.2.9. D
EFAULT DISTANCE
It is possible to set the distance for every exercise in Km, with values ranging from 1 to 999. To
change the setting, when the LED matrix shows the current setting:
Press the ENTER key to change the parameter: the current value of the parameter will start to
blink, press the CLEAR key to erase the current value and then enter one digit at a time using the
↑and ↓ keys to change the value and the +/- GOAL keys to scroll to the next character.
Press ENTER to confirm the changes made, and use the + or – effort level keys to move to the next
or preceding parameter.
The default value of this parameter is 10.
9.2.10. E TGS
NABLE
It is possible to enable or disable the use of the TGS reader. To change the selection, when the LED
matrix shows the current setting:
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
DEFAULT CALORIES : xxx
DEFAULT DISTANCE : KM xxx
TGS : xxx
TGS
ENABLED <default>
DISABLED
Page 9.9