9.3.1.1.
Hour
This parameter sets the hour of the internal clock.
9.3.1.2.
Minutes
This parameter sets the minutes of the internal clock.
9.3.1.3.
Day
This parameter sets the date of the internal clock.
9.3.1.4.
Month
This parameter sets the month of the internal clock.
9.3.1.5.
Year
This parameter sets the year of the internal clock.
9.3.1.6.
Set Clock
This item is used for programming the internal clock chip with the values entered previously. To do
this, when the LED matrix shows:
press the ENTER key.
9.3.2.
L
OW KIT PARAMETER
This function provides access to parameters used for modifying certain settings of the lower
assembly, or for monitoring the state of the machine. To access this menu, when the LED display
shows:
press ENTER. This function is structured as follows:
In addition to the 13 configuration parameters, this function also includes the 3 sub-functions
described below:
Page 9.14
SET CLOCK
LOW KIT PARAM.
LOW KIT PARAM.
RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
READ FROM
LOW KIT ?
Par.01
.......................
Par.13
WRITE TO
LOW KIT ?
DEFAULT
SETTINGS ?