Distance; Priority Setting; Maximum Excercise Time - Technogym RECLINE EXCITE Service Maintenance Manual

9.1.2. D
ISTANCE
It is possible to choose between EUROPEAN units (kg and km) or IMPERIAL units (pounds and
miles). To change the selection, when the LED matrix shows the current setting:
Press the +/- GOAL keys to select the desired unit of measurement from the options listed in the
table below:
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.1.3. P
RIORITY SETTING
If signals are available from both the chest band and hand sensors, this parameter determines which
is the preferential source for displaying the heart rate value. Obviously, if only one of these two
signals is available, it will be used even if not configured as the preferential heart rate source. To
change the selection, when the LED matrix shows the current setting:
Press the +/- GOAL keys to select the preferential source from those listed in the table below:
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.1.4. M
AXIMUM EXCERCISE TIME
It is possible to set a maximum duration for the exercise in minutes, with a value ranging from 1 to
9999. To change the setting, when the LED matrix shows the current maximum exercise time:
Press the ENTER key to modify the value: when the current parameter value starts to blink, press
the CLEAR key to erase the current value and then use the number keys to enter the desired new
value.
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 9999.
Page 9.2
RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
DISTANCE : xxx
D
ISTANCE
KM <default>
MLS
PRIORITY : xxx
P
RIORITY
BAND <default>
HANDS
MAX TIME: xxx