Model (Wellness - Technogym RECLINE EXCITE Service Maintenance Manual

• LED B
OARD
Contains the circuits for the LEDs and the alphanumeric displays. The board includes the
following indicator LEDs:
LED name
LED1
LED 2
3.1.1.3. 700E model (Wellness TV)
The display includes the boards:
• C
ONNECTORS BOARD
This board acts as the interconnection hub for all the components of the display, and serves as
the point of connection with the electrical box. It includes connectors for the following:
>
Cardio receiver;
>
Hand sensor board;
>
CSafe board;
>
AUX input board;
>
Antenna signal;
>
Voltage received from the Brake board;
>
RS-485 serial link to the Brake.
It has a connector for linking to the CPU board, to transfer the collected signals.
The board includes the following indicator LED:
LED name
D10
and a faston:
• CPU
BOARD
This is the heart of the display: it is the circuit board which incorporates the CPU, a
microprocessor, its control logic, the FLASH EPROM containing the operating program of the
machine, and the tuner for the audio and video channels. Through the connector board, it
receives signals from the various machine components.
This circuit board is directly connected to:
>
TGS/Smart Card board;
Page 3.4
Color Description
if ON the +5 Vdc digital power supply,
green stabilized by the Digital Plan board, correctly
reaches the board.
if ON the +5 Vdc power supply, provided by
yellow
the Brake Board, correctly reaches the board.
Color Description
if ON the +12 Vdc power supply provided by
red
the Brake Board, correctly reaches the board.
Name Description
SHLD: denotes a ground node on the circuit
J2
board.
RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3