TOP 600 XTPRO: Service & Maintenance Manual - rev. 2.0
7. DISASSEMBLY OF COMPONENTS
7.1. DISASSEMBLING THE DISPLAY
Figure 7.1-1
Figure 7.1-2
1. Turn off the machine and unplug the mains
lead from the wall output.
2. Remove the 4 screws a using a large Phillips
screwdriver.
Support the DISPLAY before removing
the last screw.
3. Open the DISPLAY taking care to the RJ45-
RS232 board b.
To remove the DISPLAY:
4. Disconnect connectors c.
5. Remove the DISPLAY.
To reassemble the DISPLAY, carry out the
above steps in reverse order.
Page 7.1