Service Troubleshooting Menu For 700 Models - Technogym RECLINE EXCITE Service Maintenance Manual

6.1. SERVICE TROUBLESHOOTING MENU FOR 700 MODELS

This section can be used to test the operation of certain machine components (brake board, LED
display, keyboard, serial ports). It is invoked when the machine is in standby by simultaneously
pressing the keys 369. The following prompt appears on the display:
To access the procedure, type in the password 2501 which protects against unauthorized access and
press ENTER to confirm. At this point there are two options available:
Press the number key 2 to access the troubleshooting menu, which is structured as shown in the
figure below.
AUTOMATIC TEST
To scroll through the list of available functions, press the + or – effort level keys to display the next
or the preceding item; confirm the choice by pressing ENTER. To cancel the operation, press the
CLEAR key for a few seconds.
The tests are divided into two groups: Automatic and Manual, and the prompt for a choice appears
immediately on accessing the troubleshooting menu.
Page 6.2
ENTER PASSWORD:
1 = Tech Config
2 = Troubleshooting
TROUBLESHOOTING
I2C Devices Test
LED Test
SERIAL PORTS
TEST
Test Result
Reset Result
RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
MANUAL TEST
TGS COM Test
Low Kit COM Test
CSafe COM Test
MAN.KEYBOARD
TEST