B.4 Emc Test Certificate - Universal Robots UR5e User Manual

B.4 EMC Test Certificate
B.4 EMC Test Certificate
Attestation of Conformity
AoC no. 1645
Project / task no. 117-29565
DELTA has performed compliance test on electrical products since 1967. DELTA is an accredited test
house according to EN17025 and participates in the international standardisation organisation
CEN/CENELEC, IEC/CISPR and ETSI. This attestation of conformity with the below mentioned standards
and/or normative documents is based on accredited tests and/or technical assessments carried out at
DELTA – a part of FORCE Technology.
Client
Universal Robots A/S
Energivej 25
5260 Odense
Denmark
Product identification (type(s), serial no(s).)
UR robot generation 5, G5 for models UR3, UR5, and UR10
Manufacturer
Universal Robots A/S
Technical report(s)
EMC test of UR robot generation 5, DELTA project no.117-29565-1 DANAK 19/18171
Standards/Normative documents
EMC Directive 2014/30/EU, Article 6
EN 61326-3-1:2008 Industrial locations SIL 2
EN/(IEC) 61000-6-1:2007
EN/(IEC) 61000-6-2:2005
EN/(IEC) 61000-6-3:2007+A1
EN/(IEC) 61000-6-4:2007+A1
EN/(IEC) 61000-3-2:2014
EN/(IEC) 61000-3-3:2013
The product identified above has been assessed and complies with the specified standards/normative docu-
ments. The attestation does not include any market surveillance. It is the responsibility of the manufacturer
that mass-produced apparatus have the same properties and quality. This attestation does not contain any
statements pertaining to the requirements pursuant to other standards, directives or laws other than the
above mentioned.
Hørsholm, 15 August 2017
Michael Nielsen
Specialist, Product Compliance
Version 5.0.2 I-61
DELTA – a part of
FORCE Technology
Venlighedsvej 4
2970 Hørsholm
Denmark
Tel. +45 72 19 40 00
Fax +45 72 19 40 01
www.delta.dk
VAT No. 55117314
20aoctest-uk-j
UR5e/CB5