Parameter Description - KEB COMBIVERT S4 Instruction Manual

Parameter Description

8. Parameter
Description
GB
Passwort input
Locking of CP-Parameters:
Enabling of CP-Parameters:
Actual Speed Display
GB 24
The servo controller is supplied ex factory without password protection,
i.e. all programmable parameters can be changed. After the parameterizing
the unit can be locked against unauthorized access. The adjusted mode
is stored.
The passwords are listed in page GB 45!
FUNC.
SPEED
1) Wrong password;
FUNC.
SPEED
1) Wrong password;
Display of current motor speed.
Rotation "forward": Resolution 0,5 rpm.
Rotation "reverse":
Represented by negative speed with a resolution of 1 rpm.
Example:
Parameter
enabled
START
1)
ENTER
F/R
Parameter
locked
repeat entry!
Parameter
locked
START
1)
ENTER
F/R
Parameter
enabled
repeat entry!
Rotation "forward"
Rotation "reverse"
Speed1837 rpm or 1837,5 rpm
START
Password
STOP
START
Password
STOP