Operator - KEB COMBIVERT S4 Instruction Manual

10.4 Operator

Servo controller
Parameterizing interface
5 4 3 2 1
9 8 7 6
As an accessory to the local operation an operator is necessary. To
prevent malfunctions, the Servo Controller must be brought into nOP
status before connecting/disconnecting the operator (open control release
terminal X2.1). When starting the Servo controller whitout an operator, it
is started with the last stored values or factory setting. The operator is
obtainable in different versions:
Digital-Operator
Part. No. 00.F4.010-2009
5-digit LED-Display
Interface-Operator
Part.-No. 00.F4.010-1009
In the Interface operator there is an additionally isolated RS232/RS485-
Interface integrated. The RS232/485-parameterizing interface expands
the KEB COMBIVERT S4 for communication with data communications
equipment. Suitable wiring permits the physically isolated data
transmission.
PE-Connection
PIN No. RS485 / Norm
1 –
2 –
3 –
4 A'
5 B'
6 –
7 C/C'
8 A
9 B
Accessories
START
ENTER FUNC.
F/R SPEED
STOP
Double function keyboard
Signal Meaning
– reserved
TxD Transmit signal / RS232
RxD Receive signal / RS232
RxD-A Receive signal A / RS485
RxD-B Receive signal B / RS485
VP Supply voltage
+5 V, I
COM Data reference potential
TxD-A Transmit signal A / RS485
TxD-B Transmit signal B / RS485
Operating-/Error display
Normal "LED on"
Error "LED blinks"
RS232/RS485
= 10 mA
max
GB 41
GB