Jog; Dol Start; Event Log Menu; Status Information Menu - ABB PST Series Installation And Commissioning Manual

&KDSWHU 
+XPDQ0DFKLQH ,QWHUIDFH +0,
Top level
Settings
Local Control
Event Log
Status Information
Reset Events
)LJXUH  /RFDO FRQWURO PHQX
58
  /RFDO &RQWURO PHQX
The Local Control menu is used to start or stop the motor
from the keypad. When a type of local control is selected
the softstarter can only be controlled by the keypad.
The softstarter operation state (stopped/running) remains
when selecting control until it is changed there. Previous
type of control is activated again when the type of control
is exited.
Start/Stop
Three different selections are possible (see the table
below).

Jog

Press navigation keys to view different types of control.

DOL Start

7KH /2&$/ &21752/ PHQX FDQ QRW EH HQWHUHG LI
6HTXHQFH VWDUW LV VHOHFWHG
Once the motor has been started in this menu, it must first
be stopped before you leave the menu. If the motor is
already running when the menu is entered it is possible to
leave immediately without stopping the motor.
)XQFWLRQ
Start/stop
Jog
DOL start
(PSTB370...PSTB1050
only)
'HVFULSWLRQ
To start and stop the motor
with the keypad.
To run the motor as long as
Jog is pressed.
To start and stop the motor
with the built-in by-pass con-
tactor.
1SFC132003M0201