Type Of Operation For Reset Of Fieldbus Fault; Reset Of Tripping Events - ABB PSE 18 Installation And Commissioning Manual

Figure 7.31: Type of operation for reset of
Fieldbus fault parameter displayed
Ready Run Protection
Exit
Figure 7.32: Reset of tripping events

7.5.12.4 Type of Operation for Reset of Fieldbus Fault

Select what operation shall be asserted if a fieldbus communication fault occurs.
Manual or automatic options are available. HAnd is the default value for reset of
Fieldbus Fault:
•
•
This parameter is accessible only if trIP is previously selected for the parameter
fieldbus Operation When Fault.
Display
1.
Fault

7.6 Reset of tripping events

In case of tripping event the PSE Softstarter can be reset via hardwire, keypad,
external keypad, or Fieldbus.
If the setting HAnd is chosen as an action in case of an tripping event for a pa-
rameter with this option, manual resetting of the softstarter is required.
If the setting Auto is chosen as an action in case of an tripping event for a param-
Select
eter with this option, resetting of the softstarter will be performed automatically.
Reset
Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M0201
If HAnd is selected - The motor will stop and manual reset is required.
If Auto is selected - The motor will stop and automatic reset is performed.
Default Setting
value range
HAnd HAnd/Auto
HAnd = Manual reset: _ When tripping will stop the motor, a manual reset is
Auto = Automatic reset: _ When tripping will stop the motor, an automatic reset is
Description
Type of operation for reset of Field-
bus Fault.
1
required before restart can be done.
performed before the unit is ready for restart.
Chapter 7 73