Delta VFD-B User Manual page 79

Chapter 5 Parameters|VFD-B Series
Output Signal for Base Block
Applications
General application
Overheat Warning for Heat Sink
Applications
General application
Multi-function Analog Output
Applications
General application
5-22
Purpose
Provide a signal for
running status
Purpose
For safety
Purpose
Display running
status
Functions
When executing Base Block, a signal
is sent by an external system or
control wiring.
Functions
When heat sink is overheated, it will
send a signal by an external system or
control wiring.
Functions
The value of frequency, output
current/voltage can be read by
adding a frequency meter or
voltage/current meter.
Revision July 2008, BE16, SW V4.08 & V5.00
Related
Parameters
03-00~03-03
Related
Parameters
03-00~03-03
Related
Parameters
03-05