Chapter 4 Digital Keypad Operation|VFD-B Series
Display Message
4-2
Displays the AC motor drive reverse run status.
The counter value (C).
Displays the selected parameter.
Displays the actual stored value of the selected parameter.
External Fault.
Display "End" for approximately 1 second if input has been accepted by
pressing
key. After a parameter value has been set, the new
value is automatically stored in memory. To modify an entry, use the
,
and
Display "Err", if the input is invalid.
Descriptions
keys.
Revision July 2008, BE16, SW V4.08 & V5.00