Setup Gui - Events - Actions - Bypass Actions - junger D*AP8 FLX Manual

Setup GUI – EVENTS – Actions – Bypass Actions
The bypass action is bound to the <BYPASS> button of the X*AP RM
You must simply select "follow" or "-" in the setup field.
But it also allows you to turn the bypass on for, some or all function blocks by simply enabling the check
boxes in the right hand panel:
Triggered Bypass
Trigger
Source
Lock Source
Force Trigger Active
Bypass Event
Programs
AUX
Manual Bypass
The X*AP RM1 <BYPASS> button is the trigger source
[ON / OFF]
The X*AP RM remote panel <BYPASS> button may be
1
disabled / enabled here.
[ON / OFF]
Force the bypass function from the GUI instead of the
X*AP RM remote panel <BYPASS> button.
1
[4 x 2 / 5.1 + 2]
[Input / Upmix / Filter – Spectral Signature / Filter – Equalizer /
Dynamics – Compressor / Voice Over / Level Magic – Leveler /
Level Magic –Limiter / Output]
[Input]
You can use the check boxes for manually bypassing the respective
function block of that program.
94
remote panel.
1
D*AP8