Table of Contents
Advertisement
Channel
Center Divergence
Attenuated Channels
Attenuation (dB)
Timing
Fade In Time (ms)
Hold Time (ms)
Fade Out Time (ms)
Voice Over Source
Source Format
Source Gin (dB)
Threshold (dBFS)
Setup GUI – AUDIO PROCESSOR – Level Magic
This function block is used for loudness control of the program path.
Loudness Mode
[C / L/R / L/R/C]
Here you define the channels where the voice signal must be mixed to.
[0.0 – C only ... 0.5 – LRC ... 1.0 LR only]
For the mix you can define the width of the voice signal
[All / Selected]
Which channels must be attenuated when voice over is active.
[-30 ... -10 ... 0]
[10 / 20 ... 1000]
[0.0 ... 2.0 ... 10.0]
[0.0 ... 2.0 ... 10.0]
[Stereo / Mono LL / Mono RR / Mono L+R]
[-20 ... 0 ... 20]
[-60 ... -50 ... -40]
Sets the threshold for detection in AUTO mode.
[display of the setting from AUDIO PROCESSOR > Setup >
Loudness Mode]
72
D*AP8
Advertisement
Table of Contents
