Setup Gui - Audio Processor - Input - junger D*AP8 FLX Manual

Setup GUI – AUDIO PROCESSOR – Input
You may set the input conditions for both programs (Program 1 and 2) and the AUX path here:
Link (Program 1)
Link (Progarm 2)
Input
Mute
Input Gain (dB)
Mono
Input HPF (Hz)
Input LPF (kHz)
Input Delay Coarse(ms)
Input Delay Fine (samples)
[Quad / Movie / Live / Linked / Linked & LFE]
You may select one of the possible multichannel modes to enable
gang setting of the parameter values
[Linked / Unlinked]
For stereo operation you may link the setup parameters
Similar applies fro the AUX path.
[Enable / Disable]
Enables or disables the input section
[ON / OFF]
[-80.0 ... 0.0 ... 20.0]
[Stereo / L+R Mono / L/L Mono / R/R Mono]
Not applicable for multichannel program 1
[OFF / 20 / 40 / 80 / 120]
[OFF / 15 / 20 / 22]
[0.0 ... 2000.0]
[0 ... 2000]
58
D*AP8