Table of Contents
Advertisement
D*AP8
Setup GUI – AUDIO PROCESSOR – Monitor
Setup GUI – COPROCESSOR – Overview
If you have installed the optional co-processor JDSPA it is possible to extend the functionality of the
D*AP8 by extra FM conditioners. E.g. it allows you to use the D*AP8 for multiple FM processing
channels in one device. In this case an additional tab COPROCESSOR appears
in the top navigation line:
Above you see four FM conditioner function blocks with their labels as they appear in the routing matrix
(1L ... 4R) of the D*AP8 under COPROCESSOR OUTPUT and COPROCESSOR INPUT
COPR1 ... COPR8.
The monitor output of the DSP can be connected to the outputs of
individual function blocks of one of the programs.
Source
Section / Channel
Processing Block
Downmix
Center Mix Level (dB)
Surround Mix Level (dB) [-12.0 ... -3.0 ... 0.0]
Output
Mute
Attenuation (dB)
Mono
Delay Coarse (ms)
Delay Fine (samples)
75
[Surround / 2L / 2R]
[OFF (Mute) / Input / Input Conditioner
/ Equalizer / Level Magic / Output
Conditioner]
[-12.0 ... -3.0 ... 0.0]
[OFF / ON]
[-80.0 ... 0.0]
[Stereo / L+R Mono / L/L Mono / R/R
Mono]
[0.0 ... 2000.0]
[0 ... 2000]
Advertisement
Table of Contents
