Table of Contents
Advertisement
D*AP8
As stated above, the active status of a hotkey or the result of a specific action will be high lighted in the
bright version of the assigned color. Below is an example where the action "D02 Legacy Dynamics" was
triggered by the hotkey "D02", so both are shown as active:
Below is an example for the small size version:
If you press a hotkey the color becomes
medium bright immediately.
Since many actions (e.g. reconfiguration
of the MAP) may take a few moments the
status of a button finally turns bright to
acknowledge that the action has been
performed. If the color turns back to the
dark version the action was not
successfully finished.
The up and down arrows here will
change the size of the bar graph display to
allow for more room for buttons to be
displayed. This is a four stage feature:
Small > medium size > large >
no bar graph display.
83
Advertisement
Table of Contents
