Setup Gui - Dolby Processing - Optional Dolby E Encoder - Encoder A; Setup Gui - Dolby Processing - Optional Consumer Format Encoder - Encoder B - junger D*AP8 FLX Manual

D*AP8
Setup GUI – DOLBY PROCESSING – optional Dolby E encoder – Encoder A
If the optional Dolby E encoder is licensed (see SYSTEM > Firmware Update > Licensing)
the UI shows it as Encoder A:
Setup GUI – DOLBY PROCESSING – optional consumer format encoder – Encoder B
The D*AP8 offers the option to install a consumer format (Dolby Digital / Dolby Digital plus / HE-AAC
(v1/v2) / AAC) or another optional Dolby E encoder. If an encoder is installed it shows up under
DOLBY PROCESSING. This example has a consumer format encoder installed:
The OEM module from Dolby called CAT561. The implementation for the D*AP8 platform provides two
encoded outputs. Both outputs may have independent consumer formats. If both encoders are set for
Dolby Digital plus encoding special features like providing associated services (e.g. an extra audio track
for visually impaired people, AKA audio descriptive service - AD) are available.
Encoder
Encoder Mode
Encoder Status
Program
Configuration
Frame Rate
Bit Depth
Metadata Reversion [Normal / Reversion]
Status
Metadata Bitstream [Normal / Fail]
Status
Video Frame Sync
Status
53
[Dolby E]
[Active / Metadata
Reversion / Fail]
[3x2 / 4x2 / 5.1 / 5.1 +2]
Set by the generator
[25 / 30 / 29,97 / Unknown]
[20 bits / 16 bits]
[present at Dolby E frame
rate]