Setup Gui - Events - Actions - Bypass Actions - junger D*AP4 VAP Edition Manual

D*AP4 VAP
Setup GUI – EVENTS – Actions – Bypass Actions
The bypass action is bound to the <BYPASS> button of the X*AP RM
You must simply select "follow" or "-" for the setup field.
But it also allows you to turn the bypass on of one, some or all function blocks by simply enabling the check
boxes in the right hand panel:
Trigger
Source
Lock Source
Force Trigger Active
Bypass Event
Voice
Input ... Output
Program
Input ... Output
"X*AP Remote Bypass Button"
[ON / OFF]
The X*AP RM remote panel <BYPASS> button may be
1
disabled / enabled here.
[ON / OFF]
Force the bypass function from the GUI instead of the
X*AP RM remote panel <BYPASS> button.
1
"2 x Mono / Stereo"
This is a generic setup page where both modes (2x Mono / Stereo)
can be pre-set.
Audio processing blocks of the voice path.
[follow / -]
Define the voice function block that is part of the bypass action.
Audio processing blocks of the program path.
[follow / -]
Define the program function block that is part of the bypass action.
75
remote panel.
1