Table of Contents
Advertisement
D*AP8
Above you see the various function blocks of the audio processor rendered by the DSP engine.
Each function block has its representation in the GUI by individual tab sheets. You may simply click on the
respective graphical area as an alternative way to navigate through the GUI.
It is important to understand that the physical input interfaces of the device (SDI DE-EMBEDDER, AES IN)
must be routed to the DSP inputs in order to process it. Similarly the DSP outputs must be routed to output
interfaces (SDI EMBEDDER, AES OUT). You will find those settings by clicking on the ROUTING tab.
For additional functions like FM-processing or watermarking, one may buy a co-processor module JDSPA.
It must be routed into the signal paths as well.
Control concept
The communication between the X*AP RM
based on TCP/IP over Ethernet.
The setup GUI utilizes web technology. At the time of editing this manual the functionality of the web GUI is
optimized for Firefox 35.x and higher.
The setup GUI can be complemented by other application programs running on MS Windows® XP, W7, W8
like the Junger Application Manager J*AM. Operator access will also be available for mobile devices running
an appropriate browser on iOS or Android.
An SNMP agent is also available on the device and may be explored via a SNMP monitoring system.
rd
For 3
party remote control Junger highly recommends using the l-s-b EmBER+ protocol which is widely
distributed in the European broadcast industry. The user community is also increasing rapidly world wide.
By default, the X*AP RM
Operating concept
Further below you will see that the setup GUI for the device is grouped into several parameter areas.
One can reach the parameters via a 3-tier navigation via tabs which may have sub tabs and sub tabs may
have pages embedded or extra soft buttons for groups of parameters.
Each function block (parameter area) has dedicated presets. The presets can be recalled at any time during
operation, either by manual intervention via the embedded web server (browser based GUI), automatically
by the internal event manager or by external applications.
For all relevant settings an ON AIR and a PRESET part exists. I.e. you may either edit the parameters
ON AIR or offline for the respective function block of the D*AP8.
The presets of the D*AP8 are persistent by nature. You are working directly on the preset memory.
I.e. you must not worry about storing such presets. The D*AP8 does it for you.
Event concept
The D*AP8 incorporates a sophisticated event management system.
Events may be combined to perform actions. The D*AP8 offers these event types:
* Preset Events for System set-up, Interfaces, Routing, Audio Processing, Dolby related settings etc
* Parameter Events
* Measurement Events for pre-configured measurement scenarios
* I/O Events for GPOs
* Bypass Events
These events may be combined with Actions which are fired by Triggers.
Triggers are defined by a logical combination (AND, OR, XOR) of two random trigger sources.
A trigger source may be GPIs, hotkeys of the X*AP RM
other active events, other active triggers (nested trigger), or device status information (e.g. sync lost).
remote panel, the D*AP8 unit, setup and operating tools, is
1
remote panel and the D*AP8 "talk" Ember natively.
1
remote panel, network commands, parameters,
1
7
Advertisement
Table of Contents
