Table of Contents
Advertisement
Setup GUI – SYSTEM – SNMP
This pane is meant for basic settings of the SNMP Agent of the device. If you are not familiar with the use of
SNMP protocol for system monitoring you should not enable the SNMP agent.
Setup GUI – SYSTEM – Backup / Restore
Here you can backup the complete device and restore parts or all of it .If you press <backup> the device
controller will collect all necessary data and assemble it to an XML file. Finally you will get a pop up message:
Similar applies to the restore process. You must select the desired backup file which you want to restore and
check the necessary option(s) under "Restore Device Configuration".
You must select :
<Save File>.
After pressing <OK>, the
system file dialog opens :
Select a folder
and alter that default file name
if needed.
24
D*AP8
Advertisement
Table of Contents
