Table of Contents
Advertisement
Setup GUI – AUDIO PROCESSOR – Output
Mono
Output Delay Coarse (ms)
Output Delay Fine (samples) [0 ... 2000]
Setup GUI – AUDIO PROCESSOR – Delay
The D*AP8 has an independent audio delay that may be routed to any signal path inside the device.
Important Note! If the audio delay is routed into an internal signal path via the device routing matrix one
must add an initial delay of 27 samples.
Link (Program 1) [Quad / Movie / Live /
Link (Progarm 2) [Linked / Unlinked]
Output
[L+R Mono / LL Mono / RR Mono / Stereo]
[0.0 ... 2000.0]
Link
Delay
74
Linked / Linked & LFE]
You may select one of the
possible multichannel
modes to enable gang
setting of the EQ
parameter values.
For stereo operation you
may link the setup
parameters.
[ON / OFF]]
Mute
[ON / OFF]
Attenuation
[-80.0 ... 0.0]
(dB)
[unlinked / linked]
defines the coupling of the
control circuits
[ON / OFF]
Output Delay [0.0 ... 2000.0]
Coarse (ms)
[
Output Delay [0 ... 2000]
Fine (samples) [
D*AP8
Advertisement
Table of Contents
