Table of Contents
Advertisement
Metadata Output
Timecode Input
Network Interface
USB Interface
GPI Signals
GPO Signals
Expansion Slots
Power Supply
Environmental
Physical
Technical Data – Option Board SDI I/O (3G/HD/SD) [O_DAP_SDI_a]
Standards
Video Data Rate
Video Formats
Video Delay
Audio
Audio Channels
Audio Sample Rate
Audio Delay
Metadata (RDD6)
Input conditions
Relevant specifications comply with SMPTE RDD6-2008 (Dolby Metadata).
Connector type
Output conditions
LTC timecode input, BNC, currently not supported (TBD)
RJ45 connector, 10/100Mbit Ethernet auto sense, full duplex, auto MDI/X
USB 2.0 connector to internal console interface
8 general purpose inputs (GPI), divided into 2 groups with separate
common signal, isolated
Connector type
Input conditions
Auxiliary supply
8 general purpose outputs (GPO), SPST, divided into 2 groups with
separate common signal, isolated
Connector type
Output conditions
2 general purpose expansion slots for option boards,
2 internal expansion slots for Dolby encoding, decoding and emulation
Dual power supply, automatic fail over,
85 ... 264Vac, 50 ... 60Hz, 58W (max.)
Operating temperature 0 ... 50ºC, fan cooled (dual fan),
Non-operating -20 ... 70ºC,
Humidity < 90%, non-condensing
19", 1RU, 27cm depth, net weight ca. 5kg, shipping weight ca. 7.5kg
Video complies with SMPTE 424/425M (3G, Level A and B), SMPTE 292M
(HD) or SMPTE 259M (SD). Automatic format detection.
Audio embedding and de-embedding complies with SMPTE 299M (3G,
HD) or SMPTE 272M-AC (SD).
Metadata embedding and de-embedding complies with SMPTE 2020-2.
2970/296Mbps (3G), 1485/1483.5Mbps (HD), 270Mbps (SD)
1080p23.975, 24, 25, 29.97, 30, 50, 59.94, 60
1080i50, 59.94, 60
720p23.975, 24, 25, 29.97, 30, 50, 59.94, 60
625i50, 525i59.94, ...
User selectable 0 ...15frames, can be disabled
24bits, transparent forwarding of PCM and compressed audio
16 inputs and 16 outputs (4 groups with 4 channels each)
48kHz (SDI compliant)
Embedder audio delay selectable 0 ... 320ms per channel
1 channel input and 1 channel output, SDID selectable
110Ohm RS485, 0.2 ... 5Vpp differential
D-Sub9 connector female, same conn. as input,
D-Sub9 connector male, output only
Both connectors carry the same signal.
3Vpp (typ.) @ 110Ohm differential, RS485
D-Sub25 connector female, same for GPO
3 ... 24Vdc, < 5mA@5V nom.
5V (nom.), 200mA (max.), isolated
D-Sub25 connector female, same for GPI
24Vac/dc (max.), 120mA (max.)
98
D*AP8
Advertisement
Table of Contents
