Table of Contents
Advertisement
D*AP8
At the moment of connecting a particular X*AP with a D*AP8 the X*AP configuration will be transferred
to that X*AP. I.e. configuration must take place at the D*AP8. You will decide here which feature set a
particular X*AP is allowed to control:
Setup GUI – SYSTEM – Remote Access – Mobile UI
For the moment the Mobile UI implementation is limited to emulating hotkeys and to triggering actions.
Profiles will be coming soon. They will then represent the combination of presets.
For each X*AP you will be able to pre-set a Feature Set:
X*AP Remote
IP Address
X*AP Remote
Feature Set
For each Mobile UI you will be able to pre-set if the UI is allowed
Mobile UI Device
IP Address
Mobile UI Features
Hotkeys
Actions
21
In the first line: [Default / Not listed]
you define the access
policy for an "unknown" X*AP that
connects with this D*AP8 for the first
time. The other lines are used to pre-
define features for known X*APs. When
connecting from an unknown X*AP,
the respective IP address will be inserted
automatically into the next empty line.
You can select between a "Standard Set"
that is full access for now and the access
to "Metering and Hotkeys".
I.e. any user who connects from an X*AP
with this D*AP8 will have limited access
to metering and pre-defined hot-keys
(see EVENTS > Triggers >
Remote Hotkeys).
to fire Hotkeys or trigger Actions.
In the first line: [Default / Not listed]
you define the access policy for an
"unknown" device that connects with this
D*AP8 for the first time. The other lines
are used to pre-define features for known
UIs. When connecting from an unknown
UI, the respective IP address will be
inserted automatically into the next empty
line.
Pre-defined Hotkeys from EVENTS >
Triggers > Remote Hotkeys
Pre-defined Actions from
EVENTS > Actions.
Advertisement
Table of Contents
