Setup Gui - Interfaces - Sdi I/O Interface - De-Embedder - junger D*AP8 FLX Manual

D*AP8
3G SDI Mode
Level B Stream
Select
Test Pattern Generator
Mode
Video Format
Setup GUI – INTERFACES – SDI I/O interface – De-Embedder
A 3G-SDI signal may have two HD sub streams (e.g. for 3-D TV),
AKN as 3G-B standard select between stream 1 or 2 for embedded
audio. See SMPTE 425M for details.
The interface offers a test generator to either check downstream
connections during installation or for use in case of an input fail but you
may also use it to move 16 independent audio channels over a single
coax cable from point to point.
[OFF / AUTO (Input Loss) / Always ON]
[Last valid / one of the defined SD / HD 3G formats (see specs)]
[Color Bars / Black Frame]
Audio Sync Source
(Async HD)
Embedded Word
Clock
Auto = In case of a-sync audio it is synchronized automatically to the
SDI carrier
DEM1= from de-embedder channel 1
31
The HD SDI standard allows
for asynchronous audio. This
critical if you have decided to
synchronize the device on such
signal. Here you find a solution.
You may either use the
embedded word clock
[Auto / De-Embedder CH1
(DEM 1) / OFF
OFF = synchronized to the
SDI carrier