Table of Contents
Advertisement
Hardware features
• D*AP8
• X*AP RM
1
• Dolby decoder
• Dolby encoder
• Dolby metadata I/O
• 4x AES (BNC) I/O + SRC
• Two interface slots
• RJ45 network connector
• USB connector
• 8x GPI/O
• Aux power supply
• External sync IN
• Sync OUT
Software features of D*AP8
• TP limiter
• LevelMagic II™
• Dynamic filter / EQ
• Dynamics
• Fail over Upmix
• Voice over
• Dolby metadata emulation
• Dolby metadata generator
• Loudness measurement
• SNMP agent
• Remote control
operating manual
1RU / 19" generic compact 8 channel processing unit
optional 1RU remote panel
optional built in Dolby D/D+/E decoder incl. metadata emulation
optional built in Dolby D/D+/AAC/HE-AAC or Dolby E encoder
two 9-pin D-Sub connectors (RS485)
on board AES I/Os with relay bypass and (selectable) SRC per input
expansion slots for optional I/O boards:
3-G/HD/SD-SDI, MADI, Dante, 4x AES I/O, 4Ch Analog I/O,
8 Ch Analog Out
100BaseT full duplex Ethernet interface
built in USB < > serial adapter to access the service port
balanced inputs and SSR contacts on a 25pin Sub-D
isolated 5V supply for external GPI/O wiring
BNC input (Word Clock, AES, Black Burst, Tri-Level)
BNC Word Clock output
Junger Audio true peak limiter control algorithm
optional loudness management according to ITU BS.1770-1/-2/-3/-4
EBU R128, ATSC A/85, ARIB TR-B32, Free TV OP-59,
Portaria 354
optional SPECTRAL SIGNATURE™ dynamic filter and
5 band parametric EQ
optional compressor, expander / gate
optional automatic fail over / optional 5.1 Upmix
optional 5.1 or stereo voice over from program input
optional Dolby metadata emulation
generates RDD6 complied metadata
in reference to the respective standard
SNMP v1, see D*AP8-MIB
X*AP RM1 remote panel, EmBER plus protocol and legacy GPI/Os
DAP8-MEI_manual_EN_161214.doc
D*AP8
Advertisement
Table of Contents
