junger D*AP8 FLX Manual page 16

Below you see a display for page 2
of program 2:
Voice: Input Delay Coarse [ms]
1/2
L/R
Back to page 1/2:
The display is divided into columns above the function keys and horizontal lines representing
audio channels [LFE] or groups of channels [ALL = L/R/C/Ls/Rs].
Function key #1 selects one of the available lines and selects between [ALL] and [LFE].
If you want to change the Gain for the LFE you must press key #1 to select the second line.
If you press the Gain key #5 the second gain parameter in the Gain column will be highlighted and you can
change that gain by simply turning the rotary encoder:
Input Link
ALL Linked
LFE
LFE
Similar applies for all parameter setting via the X*AP RM
1. Select the program
2. select the page where the desired parameter is in
2. select the channel / group of channels
3. select the parameter
4. set the parameter by the rotary encoder
ON/OFF parameters can be changed either by pressing the rotary encoder or turning it
counter clockwise > off or clockwise > on.
Fine [samples]
0.0 0
On Mute
On off
On off
HPF [Hz] LPF [kHz]
OFF OFF
Gain[dB] Mono
0.0
3.5
1:
[program 1]
[1/2]
[LFE]
[Gain]
[3.5]
12
D*AP8
2/2
MENU
Program 2
ESC
1/2
MENU
Program 1
ESC