Setup Gui - Measurment - Loudness - junger D*AP8 FLX Manual

D*AP8
Setup GUI – MEASUREMENT – Loudness
The D*AP8 LM offers a sophisticated loudness measurement tool for the input and output of the
program path of the device. The three control buttons <pause>, <reset>, <reset max> may be used to
manually control the actual measurement.
Loudness Mode
Current Measurement
Integrated Loudness (LUFS)
Loudness Range (LU)
Dialnorm
Short-Term Loudness (LUFS)
Momentary Loudness (LUFS)
Short Term Max (LUFS)
Momentary Max (LUFS)
True Peak Max (dBTP)
Recent Measurement
Integration time (hh:mm:ss)
Important Note! The measures of the parameters above depend on the loudness mode selected at
AUDIO PROCESSOR > Setup pane.
The measurement data may also be streamed to the PC based J*AM (Junger Application Manager).
The J*AM is a graph display and logging tool that one can download from the
site. To perform loudness measurement and loudness logging one must buy a hardware (USB) dongle.
setting from AUDIO PROCESSOR > Setup > Loudness Mode
[hh:mm:ss]
Time elapsed since measurement started (excluding pauses)
-70.0 indicates that no speech has been detected. If it is
activated in the setup but no speech is recognized by the
algorithm in this case, the background of the display box turns
yellowish.
numeric and convenient bar graph display
convenient bar graph display
same parameters as current measurement
Total time of the recent measurement
85
Jungeraudio.com web