Table of Contents
Advertisement
D*AP8
Setup GUI – AUDIO PROCESSOR - Overview
The overview shows the actual signal flow and the audio processor blocks, rendered by the DSPs.
The processing blocks in use, which may be activated from their individual setup panes, will be indicated in
green. I.e. blocks shown in grey are not activated by the user.
To navigate through the various processing blocks you may either click on the graphical block above
or use the tabs provided in the navigation bars below the bar graph displays.
The D*AP8 knows two major setups fro the number of programs which may be processed.
See SYSTE > Setup > Program Configuration
This is a general setting and has influence on all following GUI pages of the audio processor. Above we
see the appearance for 5.1 +2. If the device is set for 4 x 2 it will look this way:
56
Advertisement
Table of Contents
