Setup Gui - System - Remote Access - Mobile Ui - junger D*AP4 VAP Edition Manual

D*AP4 VAP
Setup GUI – SYSTEM – Remote Access – Mobile UI
For operator UIs on tablets, smart phones or PCs you can assign the features via its IP address:
IP Address
Voice Channel
Profiles
Hotkeys
Actions
Cough Cut
Voice Over
When connecting from a mobile device that is not pre-set, the
respective IP address will be automatically inserted.
[Voice1 / Voice 2 / Voice1, Voice2]
[ON / OFF]
Turn it on if the respective UI should show profiles to load.
[ON / OFF]
Turn it on if the UI should display the hotkeys of the X*AP that is
connected with this VAP.
[ON / OFF]
Turn it on if the UI should show actions to trigger from the UI.
[Enable / Display Only / Hide] the <Cough Cut> button of the UI.
[Enable / Display Only / Hide] the <Voice Over> button on the UI.
It will appear in the UI if manual voice over is selected
(see AUDIO PROCESSOR > Voice Over > Mode = Manual).
21