Cisco ASA 5505 Configuration Manual page 1470

ACLs
Firewall Mode
Routed
•
Add ACL
This pane lets you create a new ACL.
For information about access rules and ACLs (including IPv6), see the
Rules" section on page
For information about configuring access rules and ACLs (including IPv6), see
Rules" section on page
For information about EtherType access rules and ACLs, see the
page 30-7
Fields
•
Add/Edit ACE
An Access Control Entry (or "access rule") permits or denies access to specific URLs and services. You
can configure multiple ACEs for an ACL. ACLs apply ACEs in priority order, acting on the first match.
For information about access rules (including IPv6), see the
on page
For information about configuring access rules (including IPv6), see the
section on page
Fields
•
•
Cisco ASA 5500 Series Configuration Guide using ASDM
67-6
Security Context
Transparent Single
— •
30-1.
30-7.
ACL Name—Enter a name for the ACL. Maximum 55 characters.
30-1.
30-7.
Action—Permits or denies access to the specific networks, subnets, hosts, and web servers specified
in the Filter group field.
Filter—Specifies a URL or an IP address to which you want to apply the filter (permit or deny user
access).
URL—Applies the filter to the specified URL.
–
Protocols (unlabeled)—Specifies the protocol part of the URL address.
–
://x—Specifies the URL of the Web page to which to apply the filter.
–
TCP—Applies the filter to the specified IP address, subnet, and port.
–
IP Address—Specifies the IP address to which to apply the filter.
–
Netmask—Lists the standard subnet mask to apply to the address in the IP Address field.
–
Service—Identifies the service (such as https, kerberos, or any) to be matched. Displays a list
–
of services from which you can select the service to display in the Service field.
Multiple
Context System
— —
"Configuring Access Rules" section on
"Information About Access Rules" section
Chapter 67 Clientless SSL VPN
"Information About Access
"Configuring Access
"Configuring Access Rules"
OL-20339-01