Rear Panel - Native Instruments Komplete Audio 6 Manual

The VOLUME control lowers/increases the output level of the monitor signal.
(3) Headphones section: The
jack.
The VOLUME control lowers/increases the output signal of the headphones. The toggle switch
1/2 and 3/4 allows you to determine which output is monitored by the headphones.
4.2

Rear Panel

The rear panel of the KOMPLETE AUDIO 6.
(1) Phantom power button (48V): The phantom power button supplies 48V to condenser micro-
phones, which need this DC voltage to power their active electrical circuitry. This feature elimi-
nates the need for direct boxes or other additional hardware when using a condenser micro-
phone.
Be aware that phantom power can cause serious damage to ribbon microphones. Check
your microphone's manual to see whether it is safe to use phantom power on it. If it
isn't, make sure to disable phantom power on the interface before connecting: Switch
the 48V phantom power button on the device's rear panel off. The
ce's top panel stops lighting orange when phantom power is disabled.
PHONES socket is for plugging in headphones with a 1/4" TRS
The Hardware in Detail
48V LED on the devi-
KOMPLETE AUDIO 6 - Manual - 18
Rear Panel