Table of Contents
Advertisement
3.
Select the hardware driver supported by your controller (e.g.,
Driver
drop-down menu.
4.
Select
Maschine MK3
5.
In the
Routings
section, click
Maschine In 1 L
and
This assigns the
LINE IN
tual inputs in the MASCHINE software.
6.
In the same
Routings
of your controller you want to use for the various virtual outputs of the MASCHINE soft-
ware.
The MASCHINE software is now configured for using the internal audio interface of your
→
MASCHINE controller.
By default, the virtual outputs of the MASCHINE software are assigned as follows:
▪ The
Maschine Out 1 L
and
2: Main Right
outputs, which correspond to the
panel of your controller, respectively.
▪ The
Maschine Out 2 L
Left
and
4: Headphone Right
on the rear panel of your controller.
2.2.2
Selecting the MASCHINE Controller as Audio Device in Other Music Software
Before using the MASCHINE controller with music production software, you will need to set it
up as the software's audio output device. Most music production programs provide direct ac-
cess to the soundcard properties in the audio and MIDI setup section of their preferences dia-
log. Please refer to the documentation of your music production software for more information
on how to configure audio interfaces.
from the
Device
drop-down menu.
Input
and select 1: Input Left and 2: Input Right in the
Maschine In 1 R
drop-down menus, respectively.
/
MIC IN
combo inputs on your controller to the first pair of vir-
section, click
Output
and select the left and right output channels
and
Maschine Out 1 R
and
Maschine Out 2 R
outputs, which both correspond to the
ASIO
on Windows) from the
virtual outputs are sent to the
LINE OUT L
and
R
virtual outputs are sent to the
PHONES
MASCHINE - Getting Started - 21
Setting Up MASCHINE
Basic Audio Configuration
1: Main Left
sockets on the rear
3: Headphone
stereo socket
Hide quick links:
Advertisement
Table of Contents
